Euro limiter with remote control / ECU | Vespa & Piaggio 4T 3V i-Get Euro 4

🔧 Easily switch between speed settings with this Euro limiter ECU!

This complete Euro limiter set is specially designed for Vespa & Piaggio 4T 3V i-Get scootersincluding the Piaggio Zip 4T, Primavera, Sprint and Sco Piaggio 4T-3V i-Get. With the handy remote control switch effortlessly between a limited and unlimited mode.

✅ Key Features:

✔ Suitable for Vespa & Piaggio 4T 3V i-Get Euro 4 – Compatible with various models.
✔ Adjustable limited position – Set the maximum speed between 25 km/h and 40 km/h with a countersunk screw.
✔ Unlimited position – Use the full potential of the ECU, speed between 49 and 53 km/h.
✔ Plug & Play – Pre-programmed ECU which works immediately without extra adjustments.
✔ No effect on warranty – Recognized as original Piaggio ECU, which means updates and readouts are still possible.
✔ Includes 2 coded remote controls – Ready to use immediately.
✔ Comprehensive installation manual – Easy to assemble yourself.

📌 How does it work?

🔹 Quick Stand: Ignition on → Start engine → Operate remote control.
🔹 Limited position: Ignition on → Do not operate the remote control OF while driving contact off/on to make.

⚠ Note:

• The screw for the limit is very sensitive, do not turn too far to prevent damage! Damage due to incorrect adjustment is not covered by warranty.
• Limited speed can be locked with kit after setting.

🔧 Installation Guide (Summary)

1️⃣ Original ECU substitute by the Euro limiter ECU.
2️⃣ Connecting the limiter unit wiring:

• Blue wire → On the pink/black coil wire.
• Yellow wire → On the pulse connection of the coil.
• Black wire → Negative terminal of the battery.
• Orange wire → On the thick orange wire behind the fuse box.
  3️⃣ Installing the Euro limiter unit under the fuse holder.
  4️⃣ Set speed with the screw and test with the remote control.

🚀 Looking for a reliable and easy to install speed limiter? Order the Euro speed limiter with remote control for Vespa & Piaggio scooters now!